Page 29 - Kingspan Environmental Essential Guide

Basic HTML Version

Cylinders & Tanks
RANGE TRIBUNE HE ECOCYL
S/STEEL UNVENTED CYLINDERS
The new eco-friendly family of cylinders,
Tribune Ecocyl
, has been designed to push
the boundaries on heat loss and efficiency in performance. It features increased levels
of insulation which results in lower heat loss from the stored water. This will assist
developers further in the SAP calculations and Building Regulations compliance without
any additional work or labour costs on site. The running costs will also be lower as stored
water stays hot for longer so the boiler cycling ‘on’ and ‘off’ is kept to a minimum.
ECOCYL UNVENTED CYLINDERS
INDIRECT
ORDERING
CODE
DIRECT
ORDERING
CODE
Indirect Pre-
plumbed Single
Zone
Indirect Pre-
plumbed Twin
Zone
Capacity
(Ltrs)
Height Diameter Immersion
Heater
Fitted
Heat
Loss
kWh/24hr
TIS60ECO TDS60ECO
-
-
60
906
550
1 x 3kW 0.86
TIS90ECO TDS90ECO
-
-
90
1093
550 1 x 3kW*
0.89
TIS120ECO TDS120ECO TIS120ECOP4 TIS120ECOPT4
120
1281
550**
1 x 3kW*
0.96
TIS150ECO TDS150ECO TIS150ECOP4 TIS150ECOPT4
150 1469 550**
1 x 3kW*
1.06
TIS180ECO TDS180ECO TIS180ECOP4 TIS180ECOPT4
180
1719 550**
1 x 3kW*
1.19
TIS210ECO TDS210ECO TIS210ECOP4 TIS210ECOPT4
210 2032 550**
1 x 3kW*
1.36
28 29
50 100 150 200 250 300
Cylinder Volume
HEAT LOSS COMPARISON CHART
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
2010
Part L
Range
Tribune He
Standard
Range
Ecocyl
kWh/24h
*On direct cylinders 2 x 3kW elements are fitted as standard.
** When fitting a pre-plumbed model, please allow for an additional 150mm clearance in
the airing cupboard due to the circulatory pump head mounted on the front of the cylinder.
ECOCYL DIRECT
Ecocyl Direct
has been designed to
heat water with electricity via 3 kW
Long Life Incoloy immersion heater,
which can be used in conjunction with
‘low tariff electricity’. It can then be
installed in all electric buildings and
properties off the mains gas supply.
ECOCYL
pre-plumbed
The new
Ecocyl Indirect Pre-plumbed
cylinder has been designed to reduce
on-site installation time. Available in
Single and Twin Zone models, they
come factory assembled and both
pre-plumbed and pre-wired so there’s
no need for an electrician on site.
Simply plug and go!
ECOCYL INDIRECT
The
Ecocyl Indirect
model has been
designed to heat water via specifically
designed coil-in-coil heat exchanger
with conventional gas, oil or electric
boiler. It also has an electric immersion
heater fitted for a back-up heating.